[isolation]

Yea, I'm not sure. It seems way off to me as well. It does pull hard and has no issues that I have seen.... well other then 183 on the same dyno my Ducati did over 200. I'm told the bike will make more as I put miles on it. But I'm not buying that bs. Will be taking it to have it re-tuned soon. I would have expected at least 200 at the wheel.

 

[omasou]

Yea, I'm not sure. It seems way off to me as well. It does pull hard and has no issues that I have seen.... well other then 183 on the same dyno my Ducati did over 200. I'm told the bike will make more as I put miles on it. But I'm not buying that bs. Will be taking it to have it re-tuned soon. I would have expected at least 200 at the wheel.

I was surprised. Even the XR seemed very low at 150.

Hope you get it sorted.

 

[Ravenbravo]

Why are the numbers so low? Or am I reading the chart incorrectly?

Pretty cool to have a traveling dyno service like that.

Yeah, not sure whats up with that dyno, or it isnt flashed even though he says it is. Thats like stock HP numbers before a flash and exhaust. Something is way off here.

 

[isolation]

Yeah, not sure whats up with that dyno, or it isnt flashed even though he says it is. Thats like stock HP numbers before a flash and exhaust. Something is way off here.

I'm the he, its my bike. Its for sure flashed by btmoto. It had a noticeable difference after said flash was put on it. But I agree, something isn't right.

 

[Alpharr]

Thanks for the info. I have the same issue. Choosing tuning.

 

[Maurocacha]

hey. need to add vs carita motorsports! I use Handheld carita in my bmw k67 and it's super fast..

 

[SpeedAngel]

So has anyone used the SLR Tune on their 2023 yet? I am finally over my break in period and now faced with the BT/SLR choice.

 

[S1K Taco]

Hey, I wanted to update everyone!

I ended up going with Brentune! I purchased the IAT Relocator, velocity stacks, and sprint street filter.
Also...... My Exhaust came in! Akra Evolution

Very pumped, my first service is tomorrow. I have 550 miles, can not wait for them to unlock the bike.
Now I am deciding when should I put the Brentune on the bike. I think I will wait till I reach 1000 - 1500 miles.

Once everything is installed, I will post some pics

 

[S1K Taco]

So has anyone used the SLR Tune on their 2023 yet? I am finally over my break in period and now faced with the BT/SLR choice.

I ended up going with Brentune! All of my buddies that has S1K has the Brentune and never had any problems

 

[stan1]

I have the SLR tuning flash handle in hand, and going to install my Full TI Pista Arrow exhaust and then the flash on my 2023 S1000rr M package. I'll report afterward.

 

[S1K Taco]

I have the SLR tuning flash handle in hand, and going to install my Full TI Pista Arrow exhaust and then the flash on my 2023 S1000rr M package. I'll report afterward.

So Awesome!

 

[S1K Taco]

I have the SLR tuning flash handle in hand, and going to install my Full TI Pista Arrow exhaust and then the flash on my 2023 S1000rr M package. I'll report afterward.

Let me know what you think about your arrow system! I originally order an arrow full titanium. Waited a month and they didn't ship my exhaust at all. Even contacted the vendor and they were not getting back to me.

Got my refund and ordered the AKRA EVO! Ordered, Shipped, and received within the same week

 

[stan1]

Sure, I'll let you know. I bought mine during the Black Friday sale from Superbikeunlimted. It took only a week to get to me; it's a beautiful exhaust and a unique look at well.


My good friend who has a 2021 S1000rr has the AKRA EVO, and he likes his. I just wanted something different than what I saw out there. One thing that pops out to me is that the can entrance from the Arrow mid pipe is 65mm, vs the 60mm for stock or AKRA.

Let me know what you think about your arrow system! I originally order an arrow full titanium. Waited a month and they didn't ship my exhaust at all. Even contacted the vendor and they were not getting back to me.

Got my refund and ordered the AKRA EVO! Ordered, Shipped, and received within the same week

 

[Pipes1021]

Hey, I wanted to update everyone!

I ended up going with Brentune! I purchased the IAT Relocator, velocity stacks, and sprint street filter.
Also...... My Exhaust came in! Akra Evolution

Very pumped, my first service is tomorrow. I have 550 miles, can not wait for them to unlock the bike.
Now I am deciding when should I put the Brentune on the bike. I think I will wait till I reach 1000 - 1500 miles.

Once everything is installed, I will post some pics

I think it a good ideal so you can get some seat time prior the flash so you can notice the big difference. Akra is proven and a great exhaust. You will notice the dead spot more since you can go through the whole rpm range


Sent from my iPhone using Tapatalk

 

[stan1]

I'm making some progress... Pictures so far...

 

[stan1]

Made even more progress.

 

[S1K Taco]

Made even more progress. View attachment 226713 View attachment 226714 View attachment 226715 View attachment 226716 View attachment 226717 View attachment 226718 View attachment 226719 View attachment 226720 View attachment 226721 View attachment 226722

Looks very good! Congrats, I see you were able to install the full system without removing the radiator? The Arrow looks amazing, I bet it sounds good and delivers great hp.

I will post pictures once I am able to put more miles on the bike. Its has been consistently raining here in Michigan lol. Good news, all my parts have came in!

 

[stan1]

That's great news, I'm looking forward to your install as well.

Looks very good! Congrats, I see you were able to install the full system without removing the radiator? The Arrow looks amazing, I bet it sounds good and delivers great hp.

I will post pictures once I am able to put more miles on the bike. Its has been consistently raining here in Michigan lol. Good news, all my parts have came in!

 

[stan1]

 

[zx10guy]

Looks very good! Congrats, I see you were able to install the full system without removing the radiator? The Arrow looks amazing, I bet it sounds good and delivers great hp.

I will post pictures once I am able to put more miles on the bike. Its has been consistently raining here in Michigan lol. Good news, all my parts have came in!

If you look at one of his pics, you'll see some cardboard taped to the radiator and the oil cooler. This is a must. I did the same thing when I did my header install too. I've had some instances where removing the stock exhaust did have it press against the radiator. It's pretty tight but doable without removing the radiator and oil cooler. Another hard part of the install was the removal of the bracket that the I think the lower part of the radiator and upper part of the oil cooler mounts to. I had to get some extended length torx sockets to get that bolt off.