In my experience I have found quad 30 mm pistons to work best with either a 16 or 17 mm piston master cylinder as there is an ideal hydraulic ratio of master cylinder piston area to caliper piston area. A 19mm on 4 x 30mm pistons has very little feel and is as they say "wooden feeling".
Can't deny that the RCS is set up more for the street guys but if you are going with those calipers, might as well pull out all the stops. >
Does anyone know a work around for this- I am trying to install a Motomillion start/stop switch on my 2014 HP4 but i need to adapt the square female plug on the new switch side to work with factory larger OEM connector. Is there an adapter for this?
See attached PDF.
In the German forum one member who took his bike for oil cooler replacement said he got notified y BMW about a fix needed on his brake calipers as there was risk of leaks of fluid.
Many others went to check and effectively they found wet calipers! At least 4 more found and posted pictures.
I have a 28" inseam (long torso) and the bike will be primarily a street bike.
Already did a track day on a 2020 M, with the shortest seat equipped.
TOO HIGH for me.
For reference, I was always comfortable on stock 2005-2008 Suzuki Gixxer 1k's with stock ride heights, which is listed at 31.7...
Hey you guys,
Going to write a letter to the higher ups at BMW tomorrow. Will be in darn good English but without cutting corners. These guys need to know how much of a **** up they have released to the public. I'm even wondering if the current stop delivery/ bike unavailability for a while has...