BMW S1000RR Forum banner
1 - 2 of 2 Posts

·
Vendor
Joined
·
4,537 Posts
Those are very light hot spots.

The pads over time will glaze if you dont push them a little hard once in a while.

You can remove the pads and run them over some sand paper to knock the glaze off. Then you can use a scotch bright pad to go around the rotors a few times to knock some glazing off them.
 

·
Vendor
Joined
·
4,537 Posts
the pads goal to be a little aggressive like a 120

Then the scotch bright about a green or blue pad is good.
 
  • Like
Reactions: jebanarr
1 - 2 of 2 Posts
Top