BMW S1000RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter #1
This released last month for the S1000rr ... I wanted to share it with everyone here. Thanks..!

-Shane




Graves Motorsports BMW S1000RR Titanium Slip-on Exhaust

Graves Motorsports Cat Back Slip-on Titanium Exhaust System for the 2010-2014 BMW S1000rr. This "Strapless" style can (mounts direct to the bike with no strap around the can) and is constructed completely of titanium with a carbin fiber end cap. This system does not require the removal of any standard emissions equipment.

Features:

  • Diamond Shaped Ti Can Design to compliment the BMW's sleek look
  • Cans mounts directly to the stock piping without the use of straps, saving weight and streamlining looks.
  • Constructed from Aerospace grade Titanium alloys
  • Advanced welding process showcases laser perfection welds

Stock BMW slip on 2.98 LBS
Graves Ti slip on 1.97 LBS (saves 1 pound)


Stock sound 82 at idle and 96 at 5000
Graves sound 84 at idle and 98 at 5000


Fitment: BMW S1000rr 2010-2014
 

·
Premium Member
Joined
·
429 Posts
Looks and sounds good. I watched to video put up by STG. You should offer a carbon shield replacement for the factory stainless one.
 

·
Premium Member
Joined
·
188 Posts
This released last month for the S1000rr ... I wanted to share it with everyone here. Thanks..!

-Shane




Graves Motorsports BMW S1000RR Titanium Slip-on Exhaust

Graves Motorsports Cat Back Slip-on Titanium Exhaust System for the 2010-2014 BMW S1000rr. This "Strapless" style can (mounts direct to the bike with no strap around the can) and is constructed completely of titanium with a carbin fiber end cap. This system does not require the removal of any standard emissions equipment.

Features:

  • Diamond Shaped Ti Can Design to compliment the BMW's sleek look
  • Cans mounts directly to the stock piping without the use of straps, saving weight and streamlining looks.
  • Constructed from Aerospace grade Titanium alloys
  • Advanced welding process showcases laser perfection welds

Stock BMW slip on 2.98 LBS
Graves Ti slip on 1.97 LBS (saves 1 pound)


Stock sound 82 at idle and 96 at 5000
Graves sound 84 at idle and 98 at 5000


Fitment: BMW S1000rr 2010-2014

sick exhaust, hands down best one yet
 

·
Premium Member
Joined
·
188 Posts
Is this available for the s1000rr? I really want to swap out my akra and grab this.... I have 2 of these on my R1 and love everything about it!!
 

·
Premium Member
Joined
·
188 Posts
Will it fit hp4 mid pipe?

No recall last I asked of this exhaust was in August, and graves told my dealer that it is on their LOW priority list due to the new r2, r3 and the rest of the line up that was just released. So my guess it it's not even made yet for some odd reason, as I think this looks way better than the Akra I have.
 
1 - 6 of 6 Posts
Top