BMW S1000RR Forum banner
1 - 3 of 3 Posts

· Vendor
Joined
·
5,229 Posts
I did it. I put my older 202 ohlins in my K67.

Top is the same at the upper triple clamp but the bottom is 2mm off.

The bottom picture is my M1000 upper I put on there and the top of the 202 forks.

That is not the main issue. The front wheel also has to be a K46 ( 15-19 ) .. I used a forged HP wheel and my BrakeTech rotors.

Wheel Tire Vehicle Automotive lighting Automotive tire


Motor vehicle Automotive tire Automotive design Automotive lighting Rim
 
  • Like
Reactions: Loki66
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top