BMW S1000RR Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 20 of 103 Posts

·
Vendor
Joined
·
3,436 Posts
Discussion Starter · #1 · (Edited)
Dieci83® Aluminum Radiator and Oil Cooler Guards

We just received a few of these radiator / oil cooler guards made by Dieci83® of Italy!

100% laser-cut and pressed aluminum with no welds for a clean seamless finish!



Dieci83® radiator guards are an inexpensive solution to a potentially very expensive problem; a leaking radiator and/or oil cooler caused by a simple rock or debree slinging from your front tire. A leak in your cooling system and/or oil system will not only cause your motorcycle to over heat, which might lead to a leaking head gasket, it could be very dangerous in the event that you slip on your own leaking fluids, damage your bike and potentially cause rider injury.

Specifically made to fit your BMW's radiator and oil cooler, these screens are made from 5051 Aluminum, which make them very strong against debris, yet ultra lightweight. The Dieci83® logo is also removable for those who want a cleaner look by having no logos/brands on their motorcycles.





This kit includes everything for an effortless installation and instructions in English.

Special price just for S1000RR Forum members as always! Lowest price guaranteed!

How much?
- Radiator and Oil Cooler Guard kits are ONLY! $83.95 USD Shipped to USA.
- International Shipping to Australia, Canada, Brazil, Denmark, Finland, France, Germany, Hungary, Latvia, Malaysia, Netherlands, New Zealand, Portugal, Singapore, Spain, Switzerland and United Kingdom is only $18 USD.

How long till I receive my product?
- Only 2-4 Business days! (in USA)
- Only 5-7 Business days! (in Canada)
- International delivery varies by location. Usually no more than 10 days.

How do I purchase?
- Use the PayPal BUY NOW links below.

Will it fit my S1000RR?
- Two kits are available.
- Part Number RGRD-S1KR9-ST fits S1000RR 2009-2014, HP4 2013-2014 and S1000R 2014
- Part Number RGRD-S1KR15-ST fits S1000RR 2015 and newer, S1000R 2015 and newer, S1000XR 2015 and newer.

Installation:
- Very easy to install. On average install should only take 30 minutes.




S1000RR 2015-2018, S1000R 2015-2018, S1000XR 2015-2018 [RGRD-S1KR15-ST]
Click Link to order > https://www.motomillion.com/product...rr-and-s1000xr-radiator-and-oil-cooler-guards

---------------------------------------




Radiator and Oil Cooler Guard Set - S1000RR 2009-2014, HP4 2013-2014 and S1000R 2014 [RGRD-S1KR9-ST]
Click Link to Order > https://www.motomillion.com/product...1000rr-and-hp4-radiator-and-oil-cooler-guards



.
.
.
.
Do not hesitate to contact me if you have any questions!...
 

·
Registered
Joined
·
76 Posts
Hi

They look good. Do you have any pictures of them on the bike installed ? Looking for a set for S1KR but would like to see them
 

·
Vendor
Joined
·
3,436 Posts
Discussion Starter · #3 · (Edited)

·
Vendor
Joined
·
3,436 Posts
Discussion Starter · #7 ·
i have about 600 miles on mine so far and no rattles. still look perfect and have not budged at all!
Jealous of the fact that you were about to get that many miles riding in just a few days.
 

·
Registered
Joined
·
137 Posts
haha i ride everywhere. got my 2015 at the end of july( last day of the month). was sick one week, out of town one week, and not able to wear a helmet for one week due to dental surgery... already have almost 3k on the bike!
 

·
Vendor
Joined
·
3,436 Posts
Discussion Starter · #9 ·
haha i ride everywhere. got my 2015 at the end of july( last day of the month). was sick one week, out of town one week, and not able to wear a helmet for one week due to dental surgery... already have almost 3k on the bike!
Oh now you are just rubbing it in! 0:)
 

·
Vendor
Joined
·
3,436 Posts
Discussion Starter · #11 ·
Both 2015-2016 and 2009-2014 fitments are back in stock!

Use the BUY NOW buttons above to place your orders.

All orders ship out within the same business day Monday to Saturday!
 
1 - 20 of 103 Posts
Top