[pablanche]

Hi,
Just took delivery of my '23 S1000RR, and replaced the rear view mirrors.
I am now looking for resistor plugs to get rid of the turn signal error.

Cali Moto TV shows that he used the plugs that came with the BMW Race Cover Kit (BMW M Race Cover Kit S1000RR 2020-2023 - RevZilla)

But I cannot find anything like that online.
Any link?
Thanks,

 

[omasou]

The plugs are part of the BMW Race Cover kit. I don't see a resistor inside but have to assume they work. Will test once the bike arrives. See @BMW_388's comment below, forgot about that part.

BMW sells "repair" plugs but the prices are obnoxious making it cheaper to by the BMW Race Cover kit. #3-83300402338 is the plug for the front turn indicators and I believe #6-83300402341 is for the rear turn/stop indicator, double check that.

I found similar looking plugs on AliExpress and pictures are poor but from what I can tell the molding is different and will not work.

Blue is front, brown is rear.

I'm keeping my turn signals so, I bought the Rizoma Indicators Cable Kit EE078H, plugs for BMW to use with FR070BM - Rizoma Light Unit Indicators. The EE078H has the stock plug and maybe a resistor? (when used w/the FR070BM) that replaced the one included with the FR070BM.

See post #9 if you want to fab your own solution.

ISO: images of Tinted OEM windscreens

Anyone have a photo of the tinted OEM windscreen??? Since not available in the US, trying to figure out how much/what the tinting looks like, as I might try to order/import one to the US for my Msport XR. Thanks

www.s1000rrforum.com

 

[BMW_388]

Those plugs in the race kit are plugs only. No resistors. You are to turn off the warning lights in Race Mode pro when you track the bike and remove the rear and front signals. The plugs are only to keep dust out.

 

[pablanche]

Let's rephrase the question:
I replaced the OEM mirrors with the Rizoma's. I don't have the turn signals anymore.
Now, I have a warning light on the dashboard in Road mode.
How to avoid that? What resistor to plug?

 

[omasou]

Simulate the proper resistance by wiring in a resistor so that the computer thinks the mirrors are still there or as @BMW_388 said configure one or more Race Pro modes to turn off the warning. Not sure but that might disable the rear turn/stop indictors too?

If you want to protect the open plugs, either electrical tape them or buy blanks.

 

[Ravenbravo]

Let's rephrase the question:
I replaced the OEM mirrors with the Rizoma's. I don't have the turn signals anymore.
Now, I have a warning light on the dashboard in Road mode.
How to avoid that? What resistor to plug?

See post #3

 

[pablanche]

No one is selling a nice little dongle with the correct resistor?

 

[omasou]

Not that I know of.

I mentioned the Rizoma one but it might only be an adapter and may not have a resistor. If there is a resistor it may be additive to the LED turn indictor resistance. I don't know.

 

[pablanche]

Thanks for all the replies. I figured out how to deactivate the warning message on the dash by going through the menu, even in road mode (not only race pro). No need for the resistors after all.