S1000XR parts compatibility with RR and R - BMW S1000RR Forums: BMW Sportbike Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 15 (permalink) Old 05-21-2016, 10:47 PM Thread Starter
Moderator
 
skapan's Avatar
 
Join Date: Jul 2011
Location: Toronto Canada
Posts: 6,348
S1000XR parts compatibility with RR and R

So I'm searching around to see what swaps over from the RR and R to the XR. The engine case protection parts all fit, even though the XR has a larger output alternator. Of course all the axle adjusters and spools fit. Looks like the oil cooler guard fits but the rad guard is different to previous (RR and R) versions. The rad may actually be a bit taller. The Sierra BMW website is a great resource, everything is cross referenced as to which models use a common part.
Twisted Throttle and Wunderlich are also good sources.
skapan is offline  
Sponsored Links
Advertisement
 
post #2 of 15 (permalink) Old 05-26-2016, 02:24 PM
Junior Member
 
Prophecy's Avatar
 
Join Date: Jul 2015
Location: Minnesota
Posts: 25
Garage
The only thing I have found is that the Slipon Akropovic Exhaust and Air Filter will. Unfortunately I don't know of anything else at this time. I'm not 100% on this though, but they should.

2015 BMW s1000R (April '16 - Present)
2010 BMW s1000RR (July '15 - April '16)
2007 Suzuki GSX-R600 (Sept '12 - Jan '16)
2006 Kawasaki KLX 110 (July '13 - March '16)
2000 Kawasaki ZX6 (Nov '14 - Oct '15)

2006 Suzuki GSX-R600 (May '12 - July '12)
2000 Yamaha YZF-R6 (May '13 - Feb '14)
Prophecy is offline  
post #3 of 15 (permalink) Old 07-04-2016, 09:17 AM
Member
 
mffi115's Avatar
 
Join Date: Dec 2012
Location: Fairfield, CT
Posts: 81
I found that all the R&G engine case covers/protectors fit except for the right side clutch cover. The xr clutch case is deeper and the oil filler hole is located about an inch higher.
mffi115 is offline  
 
post #4 of 15 (permalink) Old 03-02-2017, 03:11 PM
Senior Member
 
SkyDan's Avatar
 
Join Date: Dec 2016
Posts: 250
Exhaust

I have 2nd gen. RR full system Akra installed on my XR. Slight modification was required.
Attached Thumbnails
Click image for larger version

Name:	20160422_144443.jpg
Views:	159
Size:	96.6 KB
ID:	166761  
SkyDan is offline  
post #5 of 15 (permalink) Old 04-25-2019, 04:23 PM
Member
 
Join Date: Nov 2014
Posts: 93
Hi Skapan,

Can you say what mods were needed to make the exhaust fit?

I have a S1000RR 2015 with a full Akrapovic Titanium Evo system, I would love to fit the Ti header and collector to my S1000XR 2017, I know I would need a different link pipe to match the HP Titanium can but I am not sure if the header/collector will fit.

My local distributor says it will NOT fit, but I think heís just covering himself so I canít complain if he is wrong.

Would be interested to hear what you had to do to make the Gen 2 header/collector fit?

Kind regards,

Mark.
mibridger is offline  
post #6 of 15 (permalink) Old 04-27-2019, 03:18 AM
Member
 
Join Date: Nov 2014
Posts: 93
Sorry, this is meant for SkyDan

Mark


Sent from my iPhone using Tapatalk
mibridger is offline  
post #7 of 15 (permalink) Old 04-27-2019, 04:06 AM
Lifetime Member
 
BMW_388's Avatar
 
Join Date: Mar 2015
Location: Texas
Posts: 1,986
I can answer you.

The 15 RR cylinder head configuration is the same on the 16 17 18 XR (maybe 15 also )

so, your header tubes will bolt on the cylinder head and should clear the oil filter and oil cooler just fine.
BMW_388 is offline  
post #8 of 15 (permalink) Old 04-27-2019, 04:12 AM
Member
 
Join Date: Nov 2014
Posts: 93
Thank you


Sent from my iPhone using Tapatalk
mibridger is offline  
post #9 of 15 (permalink) Old 04-27-2019, 10:05 AM
Senior Member
 
1000rrLee's Avatar
 
Join Date: Oct 2015
Location: Toronto, Ontario, Canada
Posts: 135
Coming from a 16 XR to an 18 RR - I was able to take the Evotech rad and oil cooler guards form the XR and put them on the RR without any issues. skapan - did you pick up an XR?

'18 S1000rr
'16 S1000XR (sold)
'15 S1000RR(STOLEN)
'07 Harley Davidson Night Rod Special (sold)
1000rrLee is offline  
post #10 of 15 (permalink) Old 05-02-2019, 04:13 AM
Member
 
Join Date: Nov 2014
Posts: 93
RR & XR

I have both now, a 2015 RR and a 2017 XR, I am waiting for the 2019 RR to come in September.

I'm still torn on whether to put the full Akrapovic system on from my RR on to my XR, I have an HP can on there now and it's a nice sound without being too loud, but I would like to liberate the extra horses with a full system.

My Akra dealer says the RR system will not fit, but I think it's just the mid pipe that I need, the header and collector looks the same to me.

I'll probably sell the RR system when the time comes to trade my 15 for the 19, it's a full titanium evo system, so it would be a shame to break it in half and it's worth more to sell complete than the cost of an XR header/collector (stainless steel).
mibridger is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the BMW S1000RR Forums: BMW Sportbike Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome