Join Date: Jun 2019
Location: Enköping, Sweden
Done with installing the race cover kit. It´s pretty easy as long as you do not follow the manual...
Tools needed: T20, T25, socket wrench 10 mm and a wire cutter or a knife.
Front is easy.
Tail; unscrew the fairing (1 bolt on each side beneath the tail) and gently pull horizontally ("click"). Then put one finger under the plastic fairing, work your way back towards the tail and gently pull upwards ("click" x3). That loosens the whole plastic piece and then remove it horizontally. Took me a while to figure out...