2012 and 2011 throttle spring

[gixerconvert]

Originally Posted by 3blueS1000rr

At £30 plus postage, I`m glad i made my own in fifteen minutes...Free

I could not agree more-but each to their own!
At least I'm prepared to show pictures for anyone to copy-shame you didn't

[3blueS1000rr]

Next time i pull the tank off i`ll post a pic gladly...

[menzo-62]

Can some-1 please email me a step by step removal guide to removing the airbox. Have repair manual x2 neither play on computer or dvd player. Help would be appreciated.
Please pm me. Thanx.

[gixerconvert]

Originally Posted by menzo-62

Can some-1 please email me a step by step removal guide to removing the airbox. Have repair manual x2 neither play on computer or dvd player. Help would be appreciated.
Please pm me. Thanx.

Here ya go!
Thought it might be useful for others too.
These are the instructions I send out with my brackets.


Remove Tank Top Cover (7 tx25 screws)
Remove Rider Seat (2 tx25 screws)
Remove left and right Tank Trims (each 3 tx25 screws)
Remove rear 10mm Tank Bolt
remove Side Tank Bolts (2 tx30 screws)
Disconnect Tank Breather Pipes
Lift tank and disconnect fuel line and electrical plugs and lift clear
Remove front ecu retaining screw tx25
Remove front ecu plug(by pulling clip fully forward)
Disconnect elec plug and hose to air valve
Disconnect wire to single connector clipped to upper fuel rail
Unclip zip ties to allow ecu to swing out of way
Unclip upper injector connectors+the one with white tape(ensure refit in correct positions)
Remove fuel rail screws(4 tx25) Lift fuel rail and swing out of way
Remove 4 airbox screws
Raise airbox and swing out of way

If you wish to completely remove the airbox you will need to disconnect the breather pipe and remove the electrical plug to the variable trumpet motor.

[menzo-62]

thanx gixxer, huge help. took tank off, saw the maze, seek help first. thanx again john

[BMW1000]

You guys rock!