Bike Will Not Start....

[B-Proof]

So I put on the competition werkes fender eliminator yesterday. I had to take the battery out to mount the plate under the seat. Then I put the battery back in and now the bike wont start. Is there like a secret switch or button that i need to push. Makes no sense. I thought i killed my battery but its fully charged. thats all i did besides putting the new rear blinker and licnese plate light in. Any Suggestions? Its Killing me?

[AMRRA12]

yeah turn your kill switch off

[Godzilla]

Originally Posted by AMRRA#12

yeah turn your kill switch off

He already has done if he pressed the starter button. But on most bikes thats normally the cause.

[B-Proof]

Originally Posted by AMRRA#12

yeah turn your kill switch off

Good one...but thats impossible since the kill switch and the ignition are connected. Unless there are 2. Anything else?

And there is no power at all. no lights no system check or anything as if the battery is dead but i cheked it and threw it on the charger just to be safe

[Asphalt Pirate]

Then put it in neutral or put you side stand up.....

[Godzilla]

Battery connected the correct way round?

[B-Proof]

Originally Posted by Godzilla

Battery connected the correct way round?

haha Yea I thought i lost it for a min when i found myself googling what color is positive and which is negative but the connectors are only long enough to fit one way

[AMRRA12]

Originally Posted by B-Proof

haha Yea I thought i lost it for a min when i found myself googling what color is positive and which is negative but the connectors are only long enough to fit one way

if you got the + and - backwards you could have fried the ECU

[Depths_of_Mind]

Check your fuses. If you poped then main fuse when you were putting the battery back on, No-Joy!

[URBAN LEGEND]

Originally Posted by Depths_of_Mind

Check your fuses. If you poped then main fuse when you were putting the battery back on, No-Joy!

Plus 1. Thats the first thing that came to mind.