Anyone install full devil?

**BIOHAZARDCYCLES** · 03-24-2011, 08:16 PM

has anyone here installed the full devil race replica system?
have a customer that bought one and cant figure out how to install it?

**1000RR** · 03-24-2011, 08:22 PM

You might try getting in touch/PM one of the following members:

hawaiian808
V8M3
slickfist

hawaiian808 · 03-30-2011, 01:08 PM

i have
installed it myself
whats the question?

**BIOHAZARDCYCLES** · 03-30-2011, 01:19 PM

wanted to know how short the bolts needed to be on the hanger that you added the nuts to..
also what did you do with the 2 12mm bungs..

hawaiian808 · 03-30-2011, 01:52 PM

I have yet to cut the bolts to size for thelower hanger but I figure a inch to be plenty. I used the two smaller allen bolts for the top exhaust can hanger. And as for the 12mm bungs I went to lowes and got two fine thread 12mm bolts and cut them to half and inch and used red.loctite. best way is to use a nut and cut it flush on the nut so when you back the nut off the bolt it makes sure your threads are even and good. Can't really take pictures at the moment but ill try to make a how to guide.